Product was successfully added to your shopping cart.

My Quote

You have no items in your quote.



  • Quick release 1/4 turn is an excellent fastener for quick panel removal and re-assembly. Ideal for equipment with repeat access requirement. 1/4 turn of fastener releases panel.....to re-engage simply press in the male fastener to the mating female receptacle. All fasteners are captive so that they remain attached to the removed panel even when the fastener is dis-engaged. The slotted head and socket head drive versions meet European Union Machinery Directive 2006/42/EC. To assemble this system push male fastener through outer panel hole; that is held in place by either a circlip or rubber neoprene washer which is attached to the other side of outer panel. The female receptacle is attached to the inner panel that will then allow the male fastener to engage. The tolerance receptacle version has an elongated slot 23mm long that will allow for some panel movement or miss-alignment The choice of circlip and rubber neoprene washer being used is by preference. The length of the neoprene washer will assist your calculation in the panel grip range distance. Ie, if using a 18.2mm stud (part number QTFMW60216064Z) the panel grip without a neoprene washer is 6mm. If you wish to reduce that panel grip from 6mm to 4mm then by using a 2mm neoprene washer this will reduce the panel grip from 6mm to 4mm. The circlip will retain the male fastener to the outer panel and is ideal for 'flat to flat' inner and outer panel mating. The rubber neoprene washer creates an element of 'spring open bounce' but does preclude both panels from perfect 'flat to flat' mating when the fastener system is engaged. The wear washer is an optional extra part. It is fitted upon the underside of the head of the male stud and deters the panel surface of the product being worn by the frequent turning action against the panel surface when the fastener is locked. Please note, the panel grip distance is the distance from under the head of the fastener, the outer panel thickness of your product, the thickness of the wear washer (if used), the thickness of the circlip and the thickness of the neoprene washer (if used), all to the point of the front head surface of the female receptacle onto which the male fastener is engaging. Please ensure you view our range of male receptacles and captive washers that engage with these female quick release fastener product If you require longer or shorter pin male length sizes then please enquire as additional lengths are available in 1mm increments as special order, along with a choice of thicker or thinner pin diameters Learn More

    (Q0988) Quick release 1/4 (QUARTER) turn female fastener

  • Internally fully threaded spacer with hexagon external body. Choice of 2 colour options : nylon natural (off-white cream colour) or black. Please also view our range of steel zinc, stainless steel and brass nickel plated threaded female female spacers Learn More

    (F0567) Threaded stand off nylon hexagon body female female spacer

  • The key-hole shaped interior of this fastener allows the part to collapse more completely for easy assembly with finger pressure, and the tapered, bullet-style point slides into any hole easily. The angled panel lock section takes up slack in panels to provide for a tight assembly. The design allows for a relatively large clip diameter to hole size ratio, resulting in higher retention force. Choice of 2 colour options : nylon natural (off-white cream colour) or black Learn More

    (F0097) Key hole push clip rivet

  • Arrow Clips are reusable, molded nylon fasteners that feature an inexpensive fast method to hand assemble metal, wood, plastic, composition, or other thin gauge materials. The specially designed body compresses as it is forced through a prepunched hole and springs back to its original shape to lock the assembled parts securely. The versatile clips can be disassembled and reused again and again. They provide an economical, electrical insulating, vibration, abrasion, and corrosion resistant connection. Choice of 2 colour options : nylon natural (off-white cream colour) or black Learn More

    (F6779) Arrow push clip rivet

  • Cable insulation bushings providing economical protection for wire, cable, tubing, and hose from sharp, uneven drilled or punched holes in sheet metal. The tough, resilient heat stabilized nylon bushings are easily and positively snapped into position without tools. The bushings are the economical solution to insulate wire, cables, etc. from raw edges in compact designs where internal clearances are critical. Miniature bushings accommodate panels up to 1.6mm thickness and require only 3.2mm clearance. •Material Heat Stabilised Nylon UL 94V2 •Temperature Index 105º C Please also view our range of larger sized hole diameters (12.7mm to 50mm). Choice of 2 colour options : nylon natural (off-white cream colour) or black Learn More

    (F0449) Cable insulation bushes - 3.2mm to 11.1mm internal hole diameter size range

  • Twist ties designed for mounting upon panel. Choice of fir tree, key hole or push arrow mounts. The push arrow range can be used upon Printed Circuit Boards which is easily snapped into the chassis by hand. Cables and wires can be loaded and unloaded with a simple twist of the fingers and are supported above the board eliminating possible contact with hot components. Part number ACTT/AFA0500B0018 offer an addtional feature that they have an internal spring back arm within the twist tie body for holding smaller wires or bundles. Choice of 2 colour options : nylon natural (off-white cream colour) or black Learn More

    (F0590) Push panel mount twist ties

  • Stand-off hexagon external body spacer : internally threaded at one end, male arrow panel clip at the other end to fit within panel thickness up to 1.6mm. Simply insert the male clip within a 4mm hole panel. Non corrosive nylon black as standard. Typical end user market applications within signage, control panel mfr, ECB's, display panels etc etc Learn More

    (F1278) Snap in panel black nylon threaded male / female spacer

  • Female grabber simply clips into sheet metal thickness between 2mm and 2.2mm. The female body will trigger when the male strikes it and grabs upon the male stem. To release simply press panel the catch is fitted to Learn More

    (L5643) Through hole mount touch grabber catch

  • Easy way of mounting tube / cable / pipe to panel - choice of fixing by either push pin, arrow or fir tree. Choice of 2 colour options : nylon natural (off-white cream colour) or black Learn More

    (F2790) Panel push mount cable clip

  • Simple male push in fastener. Male fins grip to hole side. This range covers male stem size diameter 3mm to 5mm. Please also view other size ranges from 5.5mm to 10.3mm. Choice of 3 colour options : nylon clear, natural (off-white cream colour) or black Learn More

    (F9003) Panel fir tree fastener - flange head - 3mm to 5mm stem size