Loading..

Product was successfully added to your shopping cart.





My Quote

You have no items in your quote.

Fasteners | Nylon Spacers & Washers | Indifit

FASTENERS

FASTENERS

Fasteners

Indifit supply a range of fasteners to suit most requirements including connector bolts, socket screws, machine screws, wood screws and blind rivets all of which are available in BZP, self-colour or stainless steel.

We also supply a range of security fasteners and shear nuts often used on security cabinets, which are available in various styles including: Clutch head, Pozi drive & pin hex.

For our full range of industry fasteners, and for any advice on which one to buy, please contact us today on 01279 656189.

 
  • Countersunk head shape through threaded rivet nuts (similar to a 'Nutsert') Female threaded tubular body shape nut with countersunk head often used to create threads upon sheet metal or tubular box section. Saves the need for you to tap your own threads, or use a rivet bush...or to create threads upon thin sheet material. Very easy product to apply and the nuts are ideal for application from front side only (no need for rear access). The full bodied countersunk head ensures very low profile head upon your front surface material after they have been applied. Create a countersunk hole into your sheet metal, insert the nut within that hole (with the aid of a threaded rivet nut tool), compress the tool (very similar action to how you would fire a blind rivet), withdraw the tool from the nut and the nut remains in the sheet metal. You now have a female thread within the sheet metal. This range of nuts are available in steel, stainless steel or aluminium material variants. Please also view our range of other body types such as hexagon outside body version, closed end (non-through threaded), low profile reduced head and also range of low cost tooling to apply them with. Learn More

    (F7566) Countersunk / csk head threaded rivet insert nut

    $0.00
  • Excellent 'hand-powered' 2 lever arm style tool for fastening threaded insert nuts (similar to 'Nutsert' product) Thread size range : M4, M5, M6, M8 and M10. Very easy to use. Apply the insert nut to the tool by holding the nut within your hand at the tool threaded tip. Push inwards the tool centre ball knob that spins the nut upon the tool male threaded mandrill. Place the nut that is attached to the tool within a predilled sheetmetal hole. Compress inwards direction the 2 side arms levers that in turn compresses the insert nut within the sheet metal hole. Decompress outwards the 2 lever arms. Pull the tool centre ball knob that will spin the threaded mandrill and extract the complete tool from the insert nut. This tool has long lever arm leverage. Total length of tool is 475mm Each tool comes complete with a threaded mandrill and collar for each thread size that are easily interchangeable Please also view our compact size geared ratio threaded rivet nut tool that reduces greatly end-user manual effort leverage Learn More

    (F8767) TWO lever large size spinner threaded rivet nut tool

    $0.00
  • Excellent 'hand-powered' 2 lever arm style tool for fastening threaded insert nuts (similar to 'Nutsert' product) Thread size range : M3, M4, M5, M6 and M8. This tool has internal geared ratio that reduces the amount of effort needed by the end user to compress the nuts. Ideal for leverage upon tough material compression such as stainless steel threed insert nuts Very easy to use. Apply the insert nut to the tool by holding the nut within your hand at the tool threaded tip. Turn clockwise the central mandrill knob that attach the nut to the tool male threaded mandrill. Place the nut that is attached to the tool within a predilled sheetmetal hole. Compress inwards direction the 2 side arms levers that in turn compresses the insert nut within the sheet metal hole. Decompress outwards the 2 lever arms. Turn anti-clockwise the central mandrill knob that will detach and extract the mandrill from the insert nut. Total length of tool is 302mm Each tool comes complete with a threaded mandrill and collar for each thread size that are easily interchangeable Please also view our larger size 'spinner' threaded rivet nut tool that spins the nuts on and off Learn More

    (F5642) TWO lever geared ratio compact threaded rivet nut tool

    $0.00
  • Excellent 'hand-powered' 2 lever arm style tool for fastening blind rivets Size diametre range : 2.4mm, 3.0mm, 3.2mm, 4.0mm, 4,8mm and 5.0mm This tool has internal geared ratio that reduces the amount of effort needed by the end user to compress the rivets. Ideal for leverage upon tough material compression such as steel or stainless steel rivets Very easy to use that has a detachable rivet pin collection bucket Total length of tool is 302mm Each tool comes complete with 4 rivet dia nose-piece for each rivet diametre that are easily interchangeable Learn More

    (F4377) Two lever geared ratio blind rivet tool

    $0.00
  • Grade 8.8 high tensile steel zinc fully threaded fastener with serrated flange face for extra grip Please note : the size range shown in the table we have listed is a selection of the most popular fasteners we sell. However, the product range we can supply is infinite so if the size or specification you require is not shown then please call the sales office and we will endeavour to supply to your requirement Learn More

    (F5641) Hexagon serrated flange faced high tensile grade 8.8 steel zinc fully threaded setscrew

    $0.00
  • Hexagon head self tapping screws that are attached with a flat loose spinning washer. The washer and the screw are retained as one part so the washer will not fall away from the screw when the screw is unfastened however, the washer will still free spin upon within the screw assembly. This offers many significant advantages over traditional self tapping screws which include: • One operation instead of two • A halving of labour costs • Increased productivity • Easy installation in difficult and confined spaces • Simpler stock keeping and inventory control Learn More

    (F5670) Captive flat washer hexagon head self tapping screw zinc

    $0.00
  • The head of the fastener has a slight oval head profile that deceptively deters vandal tamper however, they can be unfastened and re-fastened when used with mating security driver bit that can be utilised with standard screwdriver bit tooling. They are also very useful for wipe clean situations (typically within the food or medical equipment industries) as the plain top face of the head have far less areas for dirt ingress when compared to that of a standard head driven fastener. The screws are made of grade 316 (A4) stainless as standard Please also view or range of other security fasteners such as socket head pin head drive, 6 lobe pin hex drive, snake eye (2 hole / pig nose) fasteners and shear (conical snap off) nuts We can also supply special order a range of other security fasteners such security dhead drive masonry anchors, shear bolts, high securiy 4 hole drive nuts etc etc. Please contact the sales office for details. Learn More

    (F2366) Oval head stainless security fastener

    $0.00
  • Suitable for use as a bearing in pivoting applications or a fastener insulator. Finish is natural (cream / off white colour). Black available special order. This table represents flute outside diameter (bushing panel hole preparation size) from 18.3mm to 22.2mm. Please also view other size range tables as there are quite a comprehensive range of sizes to choose from. Learn More

    (NB) Nylon flanged bushing - 18.3mm to 22.2mm panel hole diameter range

    $0.00
  • Nylon 66 flat washer. Suitable for use as a spacer, to cushion or insulate. Finish is natural (cream / off white colour). Black available special order. This table represents internal hole size range from 1.1mm to 3.9mm. The washers noted in the ‘Standard’ column as ‘No’ are bought to order for you. Delivery times can vary from 7 days to 4 weeks depending upon manufacturers' delivery time at the time of your enquiry. Please enquire at the sales office for a firm delivery date. Please also view other size range tables as there are quite a comprehensive range of sizes to choose from. Learn More

    (NW) Nylon flat washer - 1.1mm to 3.9mm inside hole diameter range

    $0.00
  • Nylon 66 spacer washer. Suitable for use as a self-lubricating bearing, spacer, packer or too insulate. Finish is natural (cream / off white colour). Black available special order. This table represents internal hole size range from 16.2mm to 20.5mm. This range of spacers are all bought to order for you. Delivery times can vary from 7 days to 4 weeks depending upon manufacturers' delivery time at the time of your enquiry. Please enquire at the sales office for a firm delivery date. Please also view other size range tables as there are quite a comprehensive range of sizes to choose from. Learn More

    (NS) Nylon spacer washer - 16.2mm to 20.5mm inside hole diameter range

    $0.00