Loading..

Product was successfully added to your shopping cart.





My Quote

You have no items in your quote.

Quick release fasteners - ACCESS HARDWARE - PRODUCTS

Quick release fasteners

 
  • Quick release 1/4 turn is an excellent fastener for quick panel removal and re-assembly. Ideal for equipment with repeat access requirement. 1/4 turn of fastener releases panel.....to re-engage simply press in the male fastener to the mating female receptacle. All fasteners are captive so that they remain attached to the removed panel even when the fastener is dis-engaged. The slotted head and socket head drive versions meet European Union Machinery Directive 2006/42/EC. To assemble this system push male fastener through outer panel hole; that is held in place by either a circlip or rubber neoprene washer which is attached to the other side of outer panel. The female receptacle is attached to the inner panel that will then allow the male fastener to engage. The tolerance receptacle version has an elongated slot 23mm long that will allow for some panel movement or miss-alignment The choice of circlip and rubber neoprene washer being used is by preference. The length of the neoprene washer will assist your calculation in the panel grip range distance. Ie, if using a 18.2mm stud (part number QTFMW60216064Z) the panel grip without a neoprene washer is 6mm. If you wish to reduce that panel grip from 6mm to 4mm then by using a 2mm neoprene washer this will reduce the panel grip from 6mm to 4mm. The circlip will retain the male fastener to the outer panel and is ideal for 'flat to flat' inner and outer panel mating. The rubber neoprene washer creates an element of 'spring open bounce' but does preclude both panels from perfect 'flat to flat' mating when the fastener system is engaged. The wear washer is an optional extra part. It is fitted upon the underside of the head of the male stud and deters the panel surface of the product being worn by the frequent turning action against the panel surface when the fastener is locked. Please note, the panel grip distance is the distance from under the head of the fastener, the outer panel thickness of your product, the thickness of the wear washer (if used), the thickness of the circlip and the thickness of the neoprene washer (if used), all to the point of the front head surface of the female receptacle onto which the male fastener is engaging. Please ensure you view our range of male receptacles and captive washers that engage with these female quick release fastener product If you require longer or shorter pin male length sizes then please enquire as additional lengths are available in 1mm increments as special order, along with a choice of thicker or thinner pin diameters Learn More

    (Q0988) Quick release 1/4 (QUARTER) turn female fastener

    $0.00
  • Spring loaded black nylon latch that glides within its mounting. Very easy to install as simply clicks into position when placed within prepared panel hole. First three items in list are especially economically priced. Learn More

    (L7776) SPRING LOADED SLIDING LATCH

    $0.00
  • No tooling required. Simple thumb turn hose clamp. Thumbturn knob section is made of nylon and body of clip is stainless steel Learn More

    (Q9077) Thumbturn knob hose clamp / clip

    $0.00
  • Simple to use with finger and thumb pinch action. They self close to the hose after hand release. Choice of two versions : band section or wire. Band section have a larger hose surface spread area and are typically used upon soft hose material whereas the wire version are a cost effective solution for use upon harder surface hose material. Learn More

    (Q1455) Self closing quick release hose clamp / clip

    $0.00
  • Simple spring open clip system. Choice of narrow or wide base Learn More

    (F9006) Spring tool clip

    $0.00
  • Quick and easy locking of sliding adjusting tubes. The button clip is placed within inner tube and the button male pip section 'clicks' into the hole of the outer sliding tube to retain both tubes in place. Available in low cost pressed steel version and solid version (in choice of single or double button male pip). Learn More

    (F4513) Spring Button clip

    $0.00
  • Quick release 1/4 turn fastener is an excellent fastener for quick panel removal and re-assembly. Ideal for equipment with repeat access requirement. To remove the panel simply turn the male fastener 1/4 turn.....to re-engage simply press in the male fastener to the mating female receptacle. All fasteners are captive so that they remain attached to the removed panel even when the fastener is dis-engaged from it female receptacle counterpart. The slotted head and socket head drive versions meet European Union Machinery Directive 2006/42/EC. The assembly configuration to assemble this fastener system is male fastener through outer panel hole that is held in place by either a circlip or rubber neoprene washer which is attached upon the other side of the outer panel. The female receptacle is attached to the inner panel that will then allow the male fastener engage into the female receptacle so to clamp both the inner and outer panels together. The tolerance receptacle version has an elongated slot 23mm long that will allow for some panel movement or miss-alignment The choice of circlip and rubber neoprene washer being used is to your preference. The length of the neoprene washer will assist your calculation in the panel grip range distance. Ie, if using a 18.2mm stud (part number QTFMW60216064Z) the panel grip without a neoprene washer is 6mm. If you wish to reduce that panel grip from 6mm to 4mm then by using a 2mm neoprene washer this will reduce the panel grip from 6mm to 4mm. The circlip will retain the male fastener upon the outer panel and is ideal for 'flat to flat' inner and outer panel mating whereas the rubber neoprene washer creates an element of 'spring open bounce' for the end-user but to the detriment of both panels not being perfect 'flat to flat' mating when the fastener system is engaged. The wear washer is an optional extra part. It is fitted upon the underside of the head of the male stud and deters the panel surface of the product being worn by the frequent turning action against the panel surface when the fastener is locked. Please ensure you view our range of female receptacles and captive washers that engage with these male quick release fastener product. Please note, the panel grip distance is the distance from under the head of the fastener, the outer panel thickness of your product, the thickness of the wear washer (if used), the thickness of the circlip and the the thickness of the neoprene washer (if used), all to the point of the front head surface of the female receptacle the male fastener is enaging upon. If you require longer or shorter pin length sizes then please enquire as additional lengths are available in 1mm increments as special order along with a choice of thicker or thinner pin diameters Learn More

    (Q9086) Quick release 1/4 (QUARTER) turn male captive fastener

    $0.00
  • A simple but very effective latch system used to attach 2 panel sections together. The male part of the latch is a rubber bushing that expands when the hinged handle latch is turned. The latch body is captive to the outer panel. When engaged, the latch securely fixes both panels together. To release the latch from the inner panel, turn the handle to it's former straight position, the rubber element will contract and allow the latch to removed from the inner panel. Whilst remaining captive in use, the latch may be dis-assembled if and when required. Choice of 3 sizes: small, medium and large Please refer to 2D drawing and grid table for hole preparation and handle dimension spec Please note : the inner frame hole preparation size for the medium and large size latches increases pro-rata as the inner frame grip range increases. Please contact the sales office for accurate hole preparation size to confirm manufacturers recommended size for the frame thickness of your application. Learn More

    (Q5647) Swell action quick release latch

    $0.00
  • Image 1 is weld on within 13mm dia hole whereas all others are fastener surface mounted Learn More

    (P0778) Trigger action spring loaded release plunger hinge

    $0.00