Product was successfully added to your shopping cart.

My Quote

You have no items in your quote.

(Q0988) Quick release 1/4 (QUARTER) turn female fastener - Quick panel access fasteners - ACCESS HARDWARE - PRODUCTS

(Q0988) Quick release 1/4 (QUARTER) turn female fastener

Be the first to review this product


Quick Overview

Quick release 1/4 turn is an excellent fastener for quick panel removal and re-assembly. Ideal for equipment with repeat access requirement. 1/4 turn of fastener releases panel.....to re-engage simply press in the male fastener to the mating female receptacle.

All fasteners are captive so that they remain attached to the removed panel even when the fastener is dis-engaged.

The slotted head and socket head drive versions meet European Union Machinery Directive 2006/42/EC.

To assemble this system push male fastener through outer panel hole; that is held in place by either a circlip or rubber neoprene washer which is attached to the other side of outer panel. The female receptacle is attached to the inner panel that will then allow the male fastener to engage. The tolerance receptacle version has an elongated slot 23mm long that will allow for some panel movement or miss-alignment

The choice of circlip and rubber neoprene washer being used is by preference. The length of the neoprene washer will assist your calculation in the panel grip range distance. Ie, if using a 18.2mm stud (part number QTFMW60216064Z) the panel grip without a neoprene washer is 6mm. If you wish to reduce that panel grip from 6mm to 4mm then by using a 2mm neoprene washer this will reduce the panel grip from 6mm to 4mm.

The circlip will retain the male fastener to the outer panel and is ideal for 'flat to flat' inner and outer panel mating. The rubber neoprene washer creates an element of 'spring open bounce' but does preclude both panels from perfect 'flat to flat' mating when the fastener system is engaged.

The wear washer is an optional extra part. It is fitted upon the underside of the head of the male stud and deters the panel surface of the product being worn by the frequent turning action against the panel surface when the fastener is locked.

Please note, the panel grip distance is the distance from under the head of the fastener, the outer panel thickness of your product, the thickness of the wear washer (if used), the thickness of the circlip and the thickness of the neoprene washer (if used), all to the point of the front head surface of the female receptacle onto which the male fastener is engaging.

Please ensure you view our range of male receptacles and captive washers that engage with these female quick release fastener product

If you require longer or shorter pin male length sizes then please enquire as additional lengths are available in 1mm increments as special order, along with a choice of thicker or thinner pin diameters

* Required Fields



Part numberSize (to fit pin)DescriptionInner panel thicknessHole prep fixing rivet diaHole prep fixing distanceMaterialFinishPlease Select
QTFFRC60501034B6mm1/4 turn receptacle clip in0.6 to 1.2n/an/aSpring steelXylan black
Description/Comment :    Quantity:   
QTFFRC60601034B6mm1/4 turn receptacle clip in1.3 to 2.1n/an/aSpring steelXylan black
Description/Comment :    Quantity:   
QTFFRC60701034B6mm1/4 turn receptacle clip in2.2 to 3.69n/an/aSpring steelXylan black
Description/Comment :    Quantity:   
QTFFRR60401034B6mm1/4 turn receptacle rivet on0.5 to steelXylan black
Description/Comment :    Quantity:   
QTFFRRT60400034B6mm1/4 turn receptacle rivet on tolerance0.5 to infinite3.530Spring steelZinc
Description/Comment :    Quantity:   

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Add a review