Product was successfully added to your shopping cart.

My Quote

You have no items in your quote.

(Q0823) Captive washer and circlip for quick release 1/4 (QUARTER) turn fastener - Quick panel access fasteners - ACCESS HARDWARE - PRODUCTS

(Q0823) Captive washer and circlip for quick release 1/4 (QUARTER) turn fastener

Be the first to review this product


Quick Overview

Quick release 1/4 turn fastener is an excellent fastener for quick panel removal and re-assembly. Ideal for equipment with repeat access requirement. To remove the panel simply turn the male fastener 1/4 turn.....to re-engage simply press in the male fastener to the mating female receptacle.

All fasteners are captive so that they remain attached to the removed panel even when the fastener is dis-engaged from it female receptacle counterpart.

The slotted head and socket head drive versions meet European Union Machinery Directive 2006/42/EC.

The assembly configuration to assemble this fastener system is male fastener through outer panel hole that is held in place by either a circlip or rubber neoprene washer which is attached upon the other side of the outer panel. The female receptacle is attached to the inner panel that will then allow the male fastener engage into the female receptacle so to clamp both the inner and outer panels together. The tolerance receptacle version has an elongated slot 23mm long that will allow for some panel movement or miss-alignment

The choice of circlip and rubber neoprene washer being used is to your preference. The length of the neoprene washer will assist your calculation in the panel grip range distance. Ie, if using a 18.2mm stud (part number QTFMW60216064Z) the panel grip without a neoprene washer is 6mm. If you wish to reduce that panel grip from 6mm to 4mm then by using a 2mm neoprene washer this will reduce the panel grip from 6mm to 4mm.

The circlip will retain the male fastener upon the outer panel and is ideal for 'flat to flat' inner and outer panel mating whereas the rubber neoprene washer creates an element of 'spring open bounce' for the end-user but to the detriment of both panels not being perfect 'flat to flat' mating when the fastener system is engaged.

The wear washer is an optional extra part. It is fitted upon the underside of the head of the male stud and deters the panel surface of the product being worn by the frequent turning action against the panel surface when the fastener is locked.

Please note, the panel grip distance is the distance from under the head of the fastener, the outer panel thickness of your product, the thickness of the wear washer (if used), the thickness of the circlip and the the thickness of the neoprene washer (if used), all to the point of the front head surface of the female receptacle the male fastener is enaging upon.

Please ensure you view our range of male studs and female receptacles that engage with these quick release fastener product.

If you require longer or shorter male pin length sizes then please enquire as additional lengths are available in 1mm increments as special order along with a choice of thicker or thinner pin diameters

* Required Fields



Part numberSize (to fit pin)DescriptionMaterialFinishPlease Select
QTFWNE1500346mm2mm thick washerNeopreneSelf colour
Description/Comment :    Quantity:   
QTFWNE2500346mm3mm thick washerNeopreneSelf colour
Description/Comment :    Quantity:   
QTFWNE3500346mm4mm thick washerNeopreneSelf colour
Description/Comment :    Quantity:   
QTFWNE4500346mm6mm thick washerNeopreneSelf colour
Description/Comment :    Quantity:   
QTFWNE5500346mm8mm thick washerNeopreneSelf colour
Description/Comment :    Quantity:   
QTFWNE5600346mm10mm thick washerNeopreneSelf colour
Description/Comment :    Quantity:   
Description/Comment :    Quantity:   
QTFWCU60800034B6mmWear cup washerNylonblack
Description/Comment :    Quantity:   
Description/Comment :    Quantity:   
Description/Comment :    Quantity:   
Description/Comment :    Quantity:   
Description/Comment :    Quantity:   

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Add a review